i2Systems LightLink Marine Dimming Module [LL-101]

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

i2Systems LightLink Marine Dimming Module [LL-101]LightLink LL 101 Marine Dimming Module Part #: LL 101 Operation is simple! Press and hold the momentary switch to initiate dimming cycle. Dimming cycle continues to dim as long as switch is engaged, ranging from 100% to approximately 5% intensity holding 2 seconds at each position before dimming the opposite direction. Briefly press and release momentary switch for on off operation. Specifications: Input Voltage: 6 36 Volt DC Dimensions: Width: 1. 5"

NMEA 2000® Backbone/Drop Cable - 12' (4M) - *Case of 5*

*Note: This product is available for ground shipping only

Replacement stainless steel screws

This y-cable utilizes the two Side Imaging transducer to act as independent port and starboard Side Imaging sonar sources when boat hulls and transducer obstructions require separate transducers for a clear picture on each side of the vessel

Accepts any standard antenna with 1"-14 threads

Blue 16 AWG Primary Wire - 250'

Cover Screws and Hardware: 10-32 Stainless Steel

Delrin™ ball bearing sheave ensures low-friction operation

Zero Load Power in AES Mode: 7 W

GripTide Non-Skid Deck Coating

builders and contractors also benefit

Box Dimensions: 3"H x 3"W x 15"L WT: 0

Exchange/Return Notes