Pre-Drilled Linear Shaft - Stainless Steel - NIPDM12SS-0150-SL Diameter: 12mm Length: 150mm

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Pre-Drilled Linear Shaft - Stainless Steel - NIPDM12SS-0150-SL Diameter: 12mm Length: 150mmPre Drilled Linear Shaft of 440 Stainless Steel with a 12mm diameter and 150mm length, made in the USA by PBC Linear with Simplicity RC 50 Plus Hardness. Pre drilled with industry standard hole spacing, but no tapping has been done. Click Configure CAD and Quote for tapping or custom lengths. Optimized for Simplicity self lubricating plain bearings and linear ball bearings. Holes are spaced 120mm apart and start 60mm from the end Length tolerance: +

a 200mm length of V-rail and a carriage equipped with stainless steel sealed V-wheels

Closed Steel Shell - Round Flanged Simplicity© Die Set Plain Linear Bearing

4mm rail width

with a 30mm compensated ID

Inserted Simplicity® plain bearing with anodized aluminum shell

the inserted open-shelled Simplicity® plain bearing can tilt slightly within the housing to compensate for up to 1/2° misalignment from centerline in all directions

The self-lubricating FrelonGOLD® bore liner provides oil-free

Ball screw driven 24" linear slide using four 1" plain linear bearing pillow blocks on two steel round shafts

145 mm height

*The compensated running clearance provides more clearance between the inner diameter and shaft allowing the bearing to perform like a linear ball bearing

JIS Metric inner diameter of 80mm

pre-drilled 12" long

Exchange/Return Notes