Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

PELCO® PTFE Coated Wafer TweezersDESCRIPTION Pro High Precision tweezers are made from a non magnetic, low carbon stainless steel coated with a solvent based liquid PTFE coating The PELCO Pro High Precision tweezers are made from a non magnetic, low carbon stainless steel coated with a solvent based liquid PTFE coating formulated with special blends of fluoropolymers and other high performance resins to improve toughness and abrasion resistance. The tweezers exhibit good corrosion

The wire connected to the chip carrier allows the tip bias to use external voltage sources

uncoated sample surfaces of conductive materials in the SEM

Transmission 70%

5393-NM PELCO® Flat Tip 128

the RTESPA-525-30 provides accurate nanomechanical mapping on very stiff samples in air with controlled end radius and laser Doppler vibrometer calibrated spring constants

Good mechanical strength is achieved within minutes at room temperature

this standard for calibration provides a double-check of the accuracy of magnification calibration

G400: Pitch 62µm

Width x Thickness 5380 PELCO® Wire Cutting Tweezers 15A 120mm Carbon Steel 12 x 1

In July 2015 Bruker implemented a new process to achieve higher quality and consistency in this probe's physical appearance and dimensions

4mm 5052 ESD Safe

Hole Width 73µm

Exchange/Return Notes