Wera nutdriver for Hex bolts and nuts Series 300

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Wera nutdriver for Hex bolts and nuts Series 300Series 300 screwdriver; actually a hexagon nut driver for regular hex bolts and nuts. With multi component Kraftform handle. A nut can be installed much further on the threads than with a regular socket nut; the piece of protruding threaded rod will simply fit into the hollow shaft of the nut driver. Shaft: Round throughout; hollow inner. Nut size: 7 16". Shaft length: 90mm. Handle length: 112mm. Shaft diameter: 11mm.

Used to remove and install the Timken sprocket shaft bearing race in the left side crankcase

035" Foamet material has an aluminum base with a nitrile synthetic rubber foam layer on both sides with an additional single layer of silicone bead on one side

Fits as direct replacement rubber for all 952365

Designed with turn-out styling

Precision-engineered from heavy-duty seamless steel and finished with a durable powder coat

an innovation which combined with a 26% void ratio gives 50% more wet grip than the previous generation

The PM axle adjuster allows fine tuning via lasered hatch marks and threaded screw style adjustment sliders

5kg - Weight: 23

The stock ones are

Custom heel/toe shifter replacement for the standard OEM toe only shifter lever

Fits all models with diagnostic plug

Using heat to dismantle stubborn bolts and nut has been used for years and this tool works exactly like an open flame but faster

Exchange/Return Notes